Tired of people dying too young.  25 is too young.  Only got to jam with the guy once .  Liked him.  I liked him a lot.  We were going to start a band together he said.  Wish I could have talked him out of whatever ended up happening.  We lost a talented drummer. 

Kill Your Fucking Boss #10 4/14 @Graf

500 yen for a show in Japan?!?!?!  Yes, the way it should be.  No excuses, be there.  Support cheap shows. More info here:Facebook Events

http://fukpunk.blogspot.jp/

 https://twitter.com/fukpunk

Tsugaru Shamisen

So this is not even close to a guitar.  A Tsugaru Shamisen.  Bit longer and lower sounding than other shamisens.  Now I just need to learn how to play it better. 

Make Your Strings Bend Easier!

Have you ever had a guitar which seems like your fighting or wrestling with while playing? The strings are hard to bend and maybe you even play it with a heavier hand than other guitars. Most guitars take some adjustment to get them to your own personal tastes; string height, neck relief, etc. However an often overlooked adjustment or option is available on Gibson like guitars with tune-o-matic bridges and even some Telecasters.

Fig. 1

The Gibson tune-o-matic bridge as shown in fig 1, has a bridge and tail piece. The bridge as most people are aware, adjusts the string height and intonation. The tail piece is the anchor point to hold the strings, however it is also adjustable. This is to adjust the “break angle”, the red part of the string in figure 1, just before the string goes over the bridge saddle. Adjusting the break angle can change the feel of the guitar. The guitar actually has two break angles usually. Most guitars have one at the headstock, where the strings pass over the nut and into the tuning pegs. This effects the feel of the strings when bending them and attacking them. Some bridges don't have a break angle. They are simply fixed to the bridge. On Floyd Rose locking bridge systems, the guitar actually has no break angles, because the guitar strings are locked in place.

 So lets look at the adjustment options of the break angle at the bridge:

Fig. 2

• With the tail piece adjusted all the way to the guitars body, you increase the break angle and make it steeper, which increases the downward force on the bridge. Like the string in fig 2 B. A steeper break angle will make strings harder to bend and I've notice a bit more treble in the attack of the string.
   

• Conversely, adjusting the tail piece higher will decrease the break angel, decease the downward force on the bridge, making it less steep, like in fig 2 A. The strings will be easier to bend, and you might find you can attack the strings a bit softer. I have noticed a slight decrease in treble, with a higher break angle.

The break angle does not adjust tension. Tension for a string to hold a pitch doesn't change. The scale length of a guitar will effect tension. However, that is not adjustable. A short scale guitar will require less tension than the pitch on a long scale guitar. This is why some people prefer certain scales and brands of guitars. Think of the break angle as slack in a rope. The less force on the bridge and less break angle, the easier the strings will slide over the saddles and nut while bending a string.

So that's the tune-o-matic bridge, but an even lesser know adjustment is available on most Telecasters. I had a Tele that I was always fighting with. I would break strings like crazy. I finally decided to stop stringing the strings through the body. I though the holes the strings were coming through might have been breaking the strings anyhow. However after stringing the strings on the top of the bridge like in fig 2A, I realized I changed the feel of the guitar and changed the break angel. Now the guitar is easier to bend strings on, and I even pick it a bit lighter. I did notice a slight loss in treble, but nothing drastic. So it seems Fender gives you a break angle option.

Now, I know there are many people who strongly believe that string-through guitars and tail pieces being all the way down on the body increases sustain. I can't really disprove this, however I will say it's probably like splitting hairs. The difference is minute as best. You many hear a difference in tone. I tend to find the more force there is on the bridge the more treble and attack you get. It should be said that too steep of a break angle can sometimes cause problems with bending bridges over years. The string-through bodies as well, might just be marketing, claiming it increases sustain. I didn't find any proof of this on my Tele. Maybe I'll do a test on that soon. I do like the option to switch stringing like on most Telecasters. Also, I no longer have to worry about losing the small metal ferrules after a string breaks.

Hope this helps some people. Just another option in getting your guitar to feel the way you want it to.

New Pedal Paint Jobs

 Finally got some paint on the Harmonic Fucker (aka Harmonic Percolator Clone).  I made it a nod to Big Black's "Songs About Fucking".  It sounds as nasty as ever.  I also managed to find a use for some low output germanium Russian transistors (MP37).  I made a hybrid silicon/germanium fuzz face, with a switching option for full germanium or half.  Basically a high gain output, and low gain.  I call it "the Hige Fuzz".  Hige meaning "facial hair" in Japanese.  I think it turned out nicely.  I made a few for some friends as Christmas presents.  I've got an order to make one for sale soon as well.  You can check out how it sounds with my crappy demo video below.I'm hoping to finish up a large much-option auto-wah.  With attack-wah, auto-wah, and cocked-wah options.  We'll see.  On paper it seems like a good idea. 

2016 and Shows Coming up.

Man 2016 has been a bummer so far.  First Lemmy then Bowie.  Hard to sum up the impact those guys have had on me and millions of others.  We're going to try to put together some sort of musical tribute to Motorhead at our(Godzilla Snacks) next show (Jan30th @Marcus).  Inoue from Folk Enough has put together another festival April 29th at Utero.  Probably about 17 bands in 12 hours, just like the last one.  We had a blast at the last one.  

Hopefully the band will have a second CD done, and I'll finish a solo CD finally in 2016.  We'll see.  It's probably going to be a busy year.

White Mystery, Don Matsuo / Zoobombs, Japan Tour

This will be fun.  I enjoyed the last time I saw Don Matsuo, and I hope we can provide some hospitality to White Mystery, coming all the way from the US.  Gigi is a small place so if you're around get there early.  We (Godzilla Snacks) will be there to kick things off.  Probably around 7pm. 

Freaks!!! 9/21 and Marcus 10/03

Holy fuck! The Utero show was a fucking blast.  A lot of great bands and people there.  I was blown away by Chainsaw TV, and Folk Enough was nice enough to play "Momma Shit" for me.  There was even this piece of insanity I got to play bass for at the end of the night.

We're (Godzilla Snacks) starting with a new bassist (Nobuto) in November, for a potentially big show.  Until then, next weekend, Oct 3rd, we'll be in Marcus Kurosaki as a two-piece: Godzilla Snacks Lite.

Again tons of thanks to Inuoe-san, who organized the event last week.  12 hours, 14 bands, and it was pulled off.   Hope to do it again soon.  

Lesser Know Channel Switching Ideas.

If you're like me, you've been through a few rigs or you've at least re-designed it more than a few times.  I big part of music I love, is the use of dynamics.  Soft to loud, loud to soft.  It's a big part of the emotional part of music. I often have done what many people do in modern times to get these dynamics with an electric guitar and amp.  Either used a boost or distortion/fuzz pedal on a clean amp, or simply use the footswitch on my two channel amp. Pretty simple.  However I've been in situations where the I'm playing through a "Fender" style two channel amp with no footswitching abilities, or with an amp that is a simple one channel amp, and I'd like a quicker volume control than simply using the guitar's volume knob.

So how do we make a footswitch like channel switch on an amp with no footswitch?  There are a few simple ways which I've learn from people much older and wiser than me.

The first technique is actually the oldest idea.  Before there were fuzz pedals or boost pedals, players only had a volume knob.  Gibson guitars actually gave you two channels on their guitars by giving you two volume knobs, one for the bridge pickup and one for the neck.  They actually named these "channels" on their toggle switches as "rhythm (neck PU)" and "lead (bridge PU)"  The intended idea behind this is to dial in your basic tone on the amp with the neck(rhythm) pickup with the volume down enough to barely break up the amp.  When you switch to the bridge (lead) pickup the volume will be fully open and much louder and more distorted.  However it will be much brighter, that's when you'll need to turn down the "tone" knob to cut enough treble as you desire.  This technique works pretty well, and I've used it quite a bit in situations with no pedals and only a Gibson on a good amp.  I love where the toggle switch is on a Les Paul.  You can really hit it on the fly with your thumb.  Most of the guys you probably love from the classic rock era of the 60s and 70s probably started out this way, or continue to use this technique.  check out Page demonstrate it here: 

The next idea uses a two channel, non-switchable amp such as a Fender Reverb.  There are a ton of amps modeled after this amp and you've probably seen quite a few.  The amp actually has two sets of two inputs, for each channel.  To make this switchable by a footswitch, all we need is an ABY box.  A pedal which enables us to spit a signal and gives us the ability to switch between the two channels.  We can set each to different volumes or EQs and have two tones that are switchable by foot.  Simple.

Lastly, we have an interesting idea which actually is similar in principle to the first technique.  We'll simply cut the volume of an amp by using an EQ pedal.  For years I always used the EQ as a boost.  However most EQ pedals also allow you to cut the volume as well. The great part about this is we can shape the tone of the cut signal to customize it better.  EQ pedal off, gives us our loud full volume tone.  EQ on, gives us a clean channel.  I personally like to add a compressor to the clean signal to give it a bit more sustain and fullness. 

Even if you're happy with your setup as is right now, it's always good to have the knowledge of other ideas  You never know when you might need to use them.  I've played shows where most of my pedals aren't working or a cable has gone bad, and I've had to resort to some of these techniques.

Freaks! Live festival. More shows, Portland....

                                                                                                



 In Portland in August. September 21st, doing a 14 band festival back in Japan, and new recordings from multiple projects possibly soon, and rehearsals.  Busy..........

A few songs from an acoustic show a few weeks ago.